-
Prof. Michael James (Australian Synchrotron)03/02/2016, 09:30When VIP visitors come to the Australian Synchrotron (Commonwealth Ministers & their minders, Directors of national and international laboratories & research institutes; VCs & DVCRs; my Mother-in-Law;…) we like to play a little game to try and impress them and to demonstrate the impact of our efforts. It goes a little like this: Mike: “Pick a topic, any topic, and I will tell you how we...Go to contribution page
-
Prof. Andreas Magerl (University Erlangen-Nürnberg)03/02/2016, 09:45Semiconducting nanoparticles (quantum dots) show a wide range of potential applications due to their unique size-dependent physical and chemical properties. A major issue today concerns the make of such particles with a sufficient control of the particle size, shape and polydispersity, which calls for a good understanding of the formation mechanisms involved. We have developed a free liquid...Go to contribution page
-
Dr Jennifer MacLeod (QUT)03/02/2016, 11:30Conducting polymers are a key component of modern technologies: they are used in batteries and in displays, and they have a promising future in solar conversion and emerging technologies like flexible electronics. The polymer formed from 3,4-ethylenedioxythiophene, known as poly-3,4-ethylenedioxythiophene or PEDOT, is used in a variety of applications, primarily because of its low bandgap,...Go to contribution page
-
Dr David Hoxley (La Trobe University)03/02/2016, 11:45The challenge posed by charge accumulation at the interfaces of low dimensional electronic devices has resulted in a wide range of novel architectures as well as potential applications in organic electronics such as organic photovoltaics. These devices include, among others, organic light-emitting diodes and organic thin-film transistors. Within such devices, the use of lithium fluoride (LiF)...Go to contribution page
-
Mr Masrur Morshed Nahid (Monash University)03/02/2016, 12:00Semiconducting polymers are of interest for a range of applications including organic light-emitting diodes (OLEDs), polymer solar cells and flexible electronics. When used as the active layer in solution-processed organic field-effect transistors (OFETs) one usually finds that charge carrier mobility increases with increasing molecular weight, due to the ability of longer chains to bridge...Go to contribution page
-
Dr Tadahiko Hirai (CSIRO)03/02/2016, 12:15We approach degradation mechanisms in green thermally activated delayed fluorescence (TADF) organic light emitting diodes (OLEDs) by a numerical model fitting method included a Schottky numerical model to evaluate barrier height of carrier injection at interfaces. Using temperature dependent current-voltage (I-V) behavior of hole only (HOD) device ; glass / ITO (100nm) / HAT-CN (10) / Tris-PCz...Go to contribution page
-
Ms Mirijam Zobel (Friedrich-Alexander-University Erlangen-Nürnberg)03/02/2016, 14:30Interfaces are the key to understand manifold chemical and physical processes, for instance catalytic reactions as well as nanoparticle nucleation and growth. Nanoparticle surfaces have a strong tendency to restructure to strained atomic arrangements in order to stabilize themselves at their finite size [1,2]. But also restructuring of the solvent molecules takes place. The presence of...Go to contribution page
-
Mr Rafael Santos (Australian Institute of Innovative Materials (AIIM), University of Wollongong)03/02/2016, 14:45Magnesium-based thermoelectric materials (Mg$_2$X, X = Si, Sn, Ge) have received considerable attention due to their availability, low toxicity and reasonably good thermoelectric performance. However, the synthesis of these materials with high purity is challenging due to the volatility and high vapor pressure of magnesium. In the current study, single phase *n*-type Mg$_2$Ge has been...Go to contribution page
-
Prof. Nunzio Motta (Queensland University of Technology)04/02/2016, 09:15By using X-Ray Photoelectron Spectroscopy and Scanning Tunneling Microscopy we have been able to follow the time evolution of graphene layers obtained by annealing 3C SiC(111)/Si(111) crystals at different temperatures. Analysis of the atomic resolution images and of the Carbon signal provides a clear picture of the graphene formation. We have been able to visualise by STM the first steps of...Go to contribution page
-
Mr Hud Wahab (UNSW Canberra)04/02/2016, 09:30Technology development and device-design based upon graphene materials require reliable techniques for mass production that are time-robust and reproducible. CVD-synthesis is expected to be the prime candidate for such up-scaling. Copper is a preferred substrate for CVD. Details of the graphene-copper substrate interactions in regard to mechanical stability and electronic band structure are...Go to contribution page
-
Ms Sima Kashi (School of Civil, Environmental and Chemical Engineering, RMIT University)04/02/2016, 09:45With excellent characteristics such as high mechanical properties and electrical conductivity, graphene nanoplatelets (GNPs) can be used for reinforcing polymers and developing novel materials. In the current study, different concentrations of GNPs (0-15 wt%) were embedded into poly lactide and poly (butylene adipate-co-terephthalate) which are among the leading biodegradable polymers....Go to contribution page
-
Prof. Michael Cortie (University of Technology Sydney)04/02/2016, 10:00OralUnder specific conditions incoming light can excite a wavelike oscillatory resonance in the free electrons of a conducting material. When this oscillation propagates along a surface it is usually termed a surface plasmon polariton; when confined to a discrete nanoparticle as a standing wave it is more correctly termed a localised surface plasmon resonance (LSPR). There is currently...Go to contribution page
-
Dr Xi Quan Cheng (School of Chemical Engineering and Technology, State Key Laboratory of Urban Water Resource and Environment (SKLUWRE), Harbin Institute of Technology, Harbin 150001, P.R. China;Manufacturing Flagship ,CSIRO, Private Bag 33, Clayton South MDC, VIC 3169, Australia.)04/02/2016, 10:15A hydrophilic thin-film-composite (TFC) nanofiltration (NF) membrane has been developed through the interfacial polymerization (IP) of amino-functional polyethylene glycol (PEG) and trimesoyl chloride. The selective layer is formed on a polyethersulfone (PES) support that is characterized using FTIR, XPS and SEM, and is dependent on monomer immersion duration, and the concentration of monomers...Go to contribution page
-
Ms Fenfen Chang (The school of physics, university of New South Wales, NSW 2052)04/02/2016, 11:30Transition metal oxides (TMOs) represent a wide set of materials with a broad range of functionalities, including superconductivity, magnetism, and ferroelectricity, which can be tuned by careful choice of parameters such as strain, oxygen content, and applied electric and magnetic fields [1-4]. This tunability makes TMO’s ideal candidate materials for use in developing novel information and...Go to contribution page
-
Dr Helen Maynard-Casely (Australian Nuclear Science and Technology Organisation)04/02/2016, 11:45Hydrates are a rich and diverse class of materials that display a wide range of structures and properties – a feature that is only exaggerated when they are subjected to high-pressures. Consequently, these have implications on our understanding of many outer solar system bodies, where hydrates are amongst the dominant materials found there. For Europa and Ganymede, two moons under...Go to contribution page
-
Dr Kirrily Rule (The Bragg Institute, ANSTO)04/02/2016, 12:00One of the simplest models exhibiting one dimensional (1D) frustrated quantum interactions is the so called J1-J2 model. In this model competing ferromagnetic nearest-neighbour interactions (J1>0) and antiferromagnetic next-nearest-neighbours (J2<0) can give rise to novel phenomena such as multiferroicity for spiral spin states. Linarite, PbCuSO¬4(OH)2 is a natural mineral ideally suited to...Go to contribution page
-
Dr Xinzhi Liu (China Institute of Atomic Energies, Beijing, 102413, China/Bragg institute, ANSTO, 2232, NSW)04/02/2016, 12:15Rare earth orthoferrite RFeO3 is a family of perovskite with fantastic property, such as ultra-fast spin switching[1], photomagnetic excitation[2]and multiferrocity[3]. These properties usually determined by their magnetic structure and unique spin reorientation(SR) effect. The antisymmetric interaction(DM interaction)[4] induce a weak ferromagnetism at room temperature, while the...Go to contribution page
-
Ms Nicola Barrie (CSIRO, Manufacturing)04/02/2016, 14:30Nicola Barrie, Marina Ali, Nicholas Manolios, Minoo J. Moghaddam1 Dept Rheumatology, Westmead Hospital and University of Sydney; and 1Manufacturing Flagship, CSIRO, North Ryde. **Aims**: To develop a novel drug delivery system using cannabinoid amphiphiles and evaluate the synovial homing capabilities of peptide-conjugated nanoparticles for the targeted treatment of arthritic...Go to contribution page
-
Dr Manickam Minakshi (Murdoch University)04/02/2016, 14:45The storage and recovery of electrical energy is widely recognized as one of the most important areas for energy research. Although renewable energy such as i.e. wind and solar generated electricity is becoming increasingly available in many countries including Australia, these sources provide only intermittent energy. Thus, energy storage systems are required for load levelling, allowing...Go to contribution page
-
Mr Matthew Tate (Bragg Institute, ANSTO)04/02/2016, 15:00Oxide ion conductors are used in a wide variety of applications, including oxygen sensors and separation membranes, but are undergoing significant study for their use in solid oxide fuel cells (SOFCs), which allow for the direct conversion of chemical to electrical energy. Apatite-type silicates and germanates, La9.33+x(TO4)6O2+3x/2 (T...Go to contribution page
-
Dr Chun-Ming Wu (NSRRC)04/02/2016, 15:15Investigations of the phenomena in atomic scale are essential for fully understandings of the activities in battery operation. The battery is known to be operated in a broad temperature range below and above the ambient temperature. Temperature change could affect the performance, and might even raise safety issue. Li-platting, where metallic Li-ions accumulate onto the graphite anode, is a...Go to contribution page
-
Dr Daniel Sando (School of Materials Science and Engineering, University of New South Wales)05/02/2016, 09:15Chromism refers to a change in optical absorption of a material upon application of stimulus; e.g. photochromism – light; thermochromism – heat; electrochromism – electric charge; magnetochromism – magnetic field. This phenomenon has wide applications, in for example so-called ‘smart glass’ which can be switched from a transparent to opaque state through the application of voltage, heat, or...Go to contribution page
-
Mr Paul Graham (University of New South Wales)05/02/2016, 09:30Multiferroic materials demonstrate desirable attributes for next-generation multifunctional devices as they exhibit coexisting ferroelectric and magnetic orders. In type-II multiferroics, coupling exists that allows ferroelectricity to be manipulated via magnetic order and vice versa, offering potential in high-density information storage and sensor applications. Despite extensive...Go to contribution page
-
Mr Hu Songbai (UNSW Australia)05/02/2016, 09:45Controlling material properties by strain is one of the main concepts of thin film growth technology. By altering the order parameter in ferroic materials with which the lattice is coupled, new properties can be achieved, e.g. in perovskite SrCoOx which was identified as a parent phase of strong spin-phonon coupling materials. Here, we present results on a strain-induced...Go to contribution page
-
John Daniels (UNSW)05/02/2016, 10:00Fundamental understanding of electro-mechanical properties of ceramics requires detailed multi-length-scale analysis methods. Previously, information of the grain-scale property coupling of elastic strain and domain switching behavior under electric fields has been unobtainable from the bulk of an electro-ceramic material. Here, grain resolved scattering methods have been used to investigate...Go to contribution page
-
Dr Xiaodong Yuan (Research Center of Laser Fusion, China Academy of Engineering Physics)05/02/2016, 10:15KDP (KH2PO4) is a nonlinear transparent dielectric crystalline material used in various laser systems for harmonic generation. It has been used for inertial confinement fusion in the National Ignition Facility, USA. However, the physical and chemical properties of the KDP crystals may degrade under γ and neutron radiations. Therefore, it is important to understand the effects of radiations on...Go to contribution page
-
Dr Matt Woolley (UNSW Canberra)05/02/2016, 11:30Among the most exciting recent advances in the field of superconducting quantum circuits is the ability to coherently couple microwave photons in low-loss cavities to quantum electronic conductors [1]. These hybrid quantum systems hold great promise for quantum information processing applications, and they enable the exploration of new physical regimes of light-matter interactions. The...Go to contribution page
-
Mr Samuel Bladwell (The University of New South Wales)05/02/2016, 11:45The dynamics of charge carriers in spin-orbit coupled systems is a vital area of investigation for the extremely active field of spintronics. Controlling and manipulating the flow of electrons and holes serves as the foundation of an entire class of spintronic devices, most notably the Datta-Das spin transistor \cite{Datta1990}. In this talk, I give an overview of the dynamics of charge...Go to contribution page
Choose timezone
Your profile timezone: